Brother International PR670E Operation Manual - Page 207

Using the Optional Bobbin Winder When winding the bobbin thread onto a metal bobbin, use the optional bobbin winder. The procedures for using the optional bobbin winder are described below. Precautions For precautions concerning the power supply, refer to page 29. CAUTION • Be sure to place the bobbin winder on a level, stable surface. • Only use the bobbins supplied with this bobbin winder. Optional bobbin winder and its accessories Check that the following bobbin winder and accessories are included. Part Name Part Code 1. 3 2 Bobbin winder PRBW1 4 5 1 1 Main power switch 2 Bobbin winder shaft 3 Hole for thread guide 4 Hole for spool pin 5 DC input connector 2. Spool pin XC5949-051 3. Spool cushion XA0679-050 APPENDIX Part Name Part Code 4. Thread guide XC6644-151 5. AC adapter* - 6. Power supply cord* - 7. Metal bobbin × 5 100376-051 8. Spool cap 130012-054 9. Weight (L) XC5974-151 10. Weight (S) XC6631-051 * Visit your authorized Brother dealer. Memo • The part code of the bobbin winder set may differ depending on the country/area where the machine was purchased. • Depending on the model you purchased, the bobbin winder may be included with the machine. 7 205