Brother International PR670E Operation Manual - Page 181
Brother International PR670E Manual
View all Brother International PR670E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
■ Page 5 BASIC SETTINGS AND HELP FEATURE ■ Page 6 I J K L P M Q N R O S I Link function Set the Link function on or off. (Refer to page 142) J Manual Color Sequence Set the "Manual Color Sequence" on or off. (Refer to page 108) K Thread Sensor Set "Thread Sensor" to either "ON" or "OFF". If thread sensor is set to "OFF", the machine does not stop until embroidering is finished, even if the thread breaks or there is no more thread in the bobbin. Set thread sensor to "ON", except when it is necessary to set it to "OFF". When the machine is purchased, "ON" is selected. Note • Normally, set thread sensor to "ON". When thread sensor is set to "OFF", the machine will not be able to detect if the upper thread has become tangled. Continuing to use the machine with tangled thread may cause damage. L Mouse Pointer The shape can be selected for the pointer that appears when a USB mouse is connected. Depending upon the background color, select the desired shape from the three that are available. When the embroidery machine is purchased, is selected. * The setting remains selected even if the machine is turned off. M Units of Measure The units of measurements can be set to millimeters or inches. When the embroidery machine is purchased, "mm" is selected. N Brightness of the Screen Display The brightness of the screen display can be adjusted. The screen will appear dimmer if the number on the settings screen decreases. The screen will appear brighter as the number increases. When the embroidery machine is purchased, "4" is selected. O LANGUAGES The language setting can be specified. P The Total Count counter shows the total number of stitches sewn, and the Trip Count counter show the number of stitches that have been sewn since the machine's last maintenance. Q The Total Time counter shows the total amount of time that the machine has been used, and the Trip Time counter shows the amount of time that the machine has been used since its last maintenance. * Use counters P and Q as a standard for performing periodic maintenance and for receiving maintenance for the machine. R The "No. ##" is the number for the embroidery machine. S Version Shows the version of the software installed on this embroidery machine. (Refer to page 231.) Note • Check with your local authorized Brother dealer or at " http://s.brother/cpbac " for details on available updates. Details of each of the settings are described in the following sections. After specifying the desired settings, touch to return to the screen that was displayed before the settings screen was displayed. Note • Some settings cannot be changed while sewing. 6 179