Brother International PR670E Operation Manual - Page 208
Setting up the optional bobbin, winder, Connecting the AC adapter
![]() |
View all Brother International PR670E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
Setting up the optional bobbin winder Attach the spool pin, spool cushion and thread guide to the bobbin winder. Insert the spool pin and the spool cushion. a Lower the holder, and then insert the spool pin straight into the hole. And insert the spool cushion. Connecting the AC adapter Insert the plug of the power supply cord a into the AC adapter. Plug the cord on the AC adapter into the b DC input connector of the bobbin winder, and then insert the plug of the power supply cord into a household electrical outlet. 1 Spool pin 2 Spool pin holder 3 Hole for spool pin 4 Spool cushion Insert the thread guide. b Insert the thread guide straight into the hole with the pins on the thread guide aligned with the notches on the sides of the hole. • Be sure to firmly insert the plug on the AC adapter into the DC input connector of the bobbin winder. CAUTION • Be sure to use the included power cord. Using any other power cord may result in damage. • Be sure to use the included AC adapter. Using any other AC adapter may result in damage. • Before connecting or disconnecting the AC adapter, be sure that the unit is not operating. • After using the bobbin winder, disconnect it from the electrical outlet. 1 Pins on thread guide 2 Notches on hole for thread guide 3 Hole for thread guide • Firmly insert the thread guide as far as possible and make sure that it is secure. 206
![](/manual_guide/products/brother-international-pr670e-operation-manual-db31d3a/208.png)