Brother International PR670E Operation Manual - Page 26
Setting up the machine
View all Brother International PR670E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Minimum of 50 mm (2 inches) 587 mm (23 inches) More than 512 mm 250 mm (20-5/32 (9-1/32 inches) inches) More than 350 mm (13-3/4 inches) More than 250 mm (9-1/32 inches) CAUTION • In order to prevent malfunctions or damage, do not set up the machine in a location exposed to the following conditions. • Insufficient space • Liquids, such as water (1) • Direct sunlight (2) • Objects within the moving range of the embroidery frame (3) • Extremely high or extremely low temperatures. The operating environment should be between 5 °C (40 °F) and 40 °C (104 °F). (4) • Extreme dust (5) • Blocked ventilation slots (6) • An unstable surface (7) • Connection to extension cords or multiple adapters (8) 2 1 5 6 Setting up the machine When setting up the machine, adjust the legs so that the machine is steady. Make sure that all packing tape affixed to a the machine is peeled off and that all packing material is removed. Set up the machine while making sure that b there is sufficient space around it. Minimum of 50 mm (2 inches) 587 mm (23 inches) More than 350 mm (13-3/4 inches) More than 512 mm 250 mm (20-5/32 (9-1/32 inches) inches) More than 250 mm (9-1/32 inches) Adjust the legs so that the machine is c steady. Use the included wrench to loosen the lock nut on the leg that you wish to adjust. 1 Lock nut 2 Adjustable foot nut The foot can be turned. 3 7 8 4 Note • For your safety: Since the machine weighs approximately 38 kg (84 lb), do not set it up on an unstable table or desk. 24