Brother International PR670E Operation Manual - Page 97

OTHER BASIC PROCEDURES ■ Spool change indicator ( ) The spool change indicator in the embroidering screen indicates the number of times that the thread spools will need to be changed and the amount of time between changes. Use the scroll bar on the right side of the a thread color sequence display in the embroidering screen. Changing the Thread Spools with Designs of Seven or More Colors This section contains details on understanding the change thread spools message and on easily changing the thread spools. Memo • This feature is not available if "Manual Color Sequence" has been set to "ON" in the settings screen. 3 Change thread spools message  Each time is touched, the thread color sequence display scrolls down to the next color. After reaching the last color in the thread color sequence display, the first color is selected. • The display can also be scrolled by using the scroll bar. Check the position of . b When it is necessary to replace the thread spool while embroidering a pattern that contains seven or more colors, the machine automatically stops sewing and the message shown below appears. This message also appears when it is necessary to change the thread spools before beginning to embroider a new pattern. Change the thread spools according to their new assignments. 2 1 1 indicates when the thread spools will need to be changed. The thread spools will need to be changed the number of times that this indicator is displayed and between the two thread colors at the point where it is displayed. 2 Touch to scroll up through the thread color sequence display. Each time this key is touched, the previous color in the thread color sequence display is selected. After reaching the first color in the thread color sequence display, the last color is selected. After checking the desired information, c touch or the top of the scroll bar to return to the first color. 1 2 3 1 The thread information for the thread spool to be changed appears in the new thread color and framed in red. 2 The thread information for the thread spool needs not to be changed appears in gray. 3 Touch this key to close the message indicating that the thread spool be changed. 95