Brother International PR670E Operation Manual - Page 121

EMBROIDERING SETTINGS Temporary Needle Bar Setting Memo • The thread color (needle bar) cannot be changed in the middle of an area that is being sewn. After embroidering begins, the machine can be stopped at a color change and a different needle bar can be specified for the next color to be sewn. By substituting an upper thread color already threaded on a different needle bar, the time for sewing can be saved. For example, similar color thread can be substituted for temporary use. Uninterrupted embroidering (monochrome) A selected pattern can be stitched out in one color instead of multicolor. The machine will hesitate but not stop between color steps, and then continue till the pattern is completed. Touch . a Touch the key for the needle bar threaded a with the thread you wish to embroider uninterruptedly. 4  The temporary needle bar setting screen appears. Touch the key for the needle bar threaded b with the thread that you wish to embroider with. Touch for the multicolor steps to b become shaded and the selected pattern will embroider in a single color, instead of changing the thread while embroidering.  The needle bar number changes and indicate the selected needle bar.  To cancel the setting, touch . appears to Touch . c  The embroidering screen appears again.  The thread color displayed on the screen will be grayed out. • Touch again to return to the pattern's original settings. Memo • Even if uninterrupted embroidering has been set, the DST thread trimming function can be used (refer to page 184). • After finishing the embroidery, uninterrupted embroidery will be canceled. 119