Brother International PR670E Operation Manual - Page 118
Maximum Sewing Speed, Setting
View all Brother International PR670E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Touch . i Maximum Sewing Speed Setting The needle bar is positioned in the lower-left corner of the pattern. The embroidery frame moves so that the needle is positioned correctly. Touch . j Use to align the needle with the end of k embroidering for the previous pattern. The maximum sewing speed can be set to one of seven levels at every 100 spm between 400 and 1000 spm. If Cap frame, Cylinder frame or Clamp frame is used, the maximum sewing speed can be set to one of five levels at every 50 spm between 400 and 600 spm. Maximum sewing speed Embroidery frame/Flat frame/ Round frame/ or other frames 1 1000 2 900 3 800 4 700 5 600 6 500 7 400 Cap frame/ Cylinder frame/ Clamp frame 1 600 2 550 3 500 4 450 5 400 - - - - Note • You can also follow the procedure in page 90 to find the sewing position, by directly place the needle over the end of the previous pattern. Touch . l Touch , and then press the start/stop m button to begin embroidering the remaining character patterns. The maximum sewing speed setting is specified from the embroidering screen. When the embroidery machine is purchased, the maximum sewing speed is set to 1000 spm (Cap frame, Cylinder frame or Clamp frame for 600 spm). For the types of embroidery frames, refer to "Types of embroidery frames/frame holders and their applications" on page 82. To increase the sewing speed, touch . To a decrease the sewing speed, touch . 116 The value beside and changes.