Brother International PR670E Operation Manual - Page 168

Create the repeated pattern with the thread a mark at the center of the end of the pattern. Refer to "Assigning thread marks" on page 165. Attach the embroidery frame to the f machine, and then touch in the embroidering settings screen. Touch , , then . b Touch , and then press the start/stop c button to start embroidering.  When embroidering is finished, the thread mark is sewn with the last thread color. Remove the embroidery frame. d Rehoop the fabric in the embroidery frame. e Note • Adjust the position of the fabric so that the embroidering area for the next pattern is within the embroidering area of the embroidery sheet. Touch to set the starting point to the left g side of the pattern. Touch . h Align the needle drop point with the thread i mark sewn in the fabric. Refer to "Changing the Embroidering Position" on page 89. If the pattern position cannot be aligned j using the positioning keys, rehoop the fabric, and then try again to align the position with the positioning keys. Note • After you have aligned the position of the combined border pattern, do not rotate the pattern in the embroidering settings screen. If the pattern is rotated in the embroidering settings screen, you cannot sew the pattern properly aligned even if the thread mark and the starting point are aligned. Touch k screen. to return to the previous 1 Pattern embroidered first 2 Position of pattern to be embroidered next 3 Embroidering area of embroidery sheet Remove the thread mark. l Touch . m Touch , and then press the start/stop n button to start embroidering. 166