Brother International PR670E Operation Manual - Page 85
used is too large, the pattern may be misaligned or the fabric may pucker.
![]() |
View all Brother International PR670E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
OTHER BASIC PROCEDURES Embroidery type Clamp frame S (optional) Embroidering area Usage 24 mm (H) × 45 mm (W) (7/8 inches (H) × 1-3/4 inches (W)) Use when embroidering specialty shaped items that cannot be held in normal frames, such as shoes and gloves. Reference Consult your nearest authorized Brother dealer. Embroider y frame holder D (optional) Embroider y frame holder E (optional) Clamp frame M (optional) Compact frame (optional) Magnetic frame (optional) 100 mm (W) × 100 mm (H) (4 inches (H) × 4 inches (W)) Use when embroidering specialty shaped items, such as narrow bags. 70: 41 mm (H) × 70 mm (W) (1-5/8 inches (H) × 2-3/4 mm (W))) 50: 50 mm (H) × 50 mm (W) (2 inches (H) × 2 inches (W)) 44: 38 mm (H) × 44 mm (W) (1-1/2 inches (H) × 1-3/4 inches (W)) Vertical: 33 mm (H) × 75 mm (W) (1-5/16 inches (H) × 2-15/16 inches (W)) Use when embroidering logos or embroidery patterns on small items. 50 mm (H) × 50 mm (W) (2 inches (H) × 2 inches (W)) Use to prevent the embroidery frame from leaving traces in the fabric. Consult your nearest authorized Brother dealer. 3 Advanced cap frame 2 (optional) Advanced cap frame Cylinder frame (optional) 60 mm (H) × 130 mm (W) (2-3/8 inches (H) × 5-1/8 inches (W)) Use when embroidering caps. Baseball (golf) caps, tulip hats and bucket hats can be embroidered with these frames. These frames cannot be used with hats having a front area of 60 mm (2-3/8 inches) or less, such as sun visors and children's hats. In addition, these cannot be used with hats that have a brim longer than 80 mm (3-1/8 inches). 50 mm (H) × 130 mm (W) (2 inches (H) × 5-1/8 inches (W)) Use when embroidering caps. Baseball (golf) caps, tulip hats and bucket hats can be embroidered with these frames. These frames cannot be used with hats having a front area of 50 mm (2 inches) or less, such as sun visors and children's hats. In addition, these cannot be used with hats that have a brim longer than 80 mm (3-1/8 inches). 80 mm (H) × 90 mm (W) (3 inches (H) × 3-1/2 inches (W)) Use when embroidering tubular and curved fabric, such as shirt sleeves and turtlenecks. Consult your nearest authorized Brother dealer. Consult your nearest authorized Brother dealer. Consult your nearest authorized Brother dealer. Note • The embroidery frame indicators show all embroidery frame sizes in which the embroidery pattern can be sewn. Be sure to use an embroidery frame of the most suitable size. If the embroidery frame that is used is too large, the pattern may be misaligned or the fabric may pucker. • Due to the weight of the embroidery frame and fabric it is recommended that the optional table be used, to prevent the frame holder from bending, which may result in the distortion of your design or machine damage. 83
![](/manual_guide/products/brother-international-pr670e-operation-manual-db31d3a/85.png)