Brother International PR670E Operation Manual - Page 27

Use the included wrench to turn the d adjustable foot nut on the foot. Turning the nut in direction 1 lengthens the leg; turning the nut in direction 2 shortens the leg. GETTING READY Adjusting the operation panel position 1 Adjust the orientation and angle of the operation panel so it can easily be operated. Loosen 2 thumb screws to bring the a operation panel forward. 1 Adjustable foot nut • Adjust all four legs so that they securely contact the desk or table, and the machine is level. After adjusting the legs to the desired e length, use the included wrench to tighten the nuts. 1 Thumb screws Adjust the operation panel to an easy-tob operate position, and then tighten the thumb screws. 1 Lock nut Press down on each corner of the f embroidery machine to check that it is stable. If it is still unstable, perform steps c through e again to adjust the legs. Adjust the orientation of the operation c panel. Loosen the thumb screw, adjust the operation panel to an easy-to-view orientation, and then tighten the thumb screw. 1 Thumb screw 25