Brother International PR670E Operation Manual - Page 28
Preparing the thread guide, assembly
![]() |
View all Brother International PR670E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Adjust the angle of the operation panel. d Loosen the 2 thumb screws behind the operation panel, adjust the operation panel to an easy-to-view angle, and then tighten the thumb screws. (Side view) 1 Thumb screws (Top view) Note • Using the disc-shaped screwdriver included, loosen and firmly tighten the five thumb screws. Preparing the thread guide assembly Raise the thread guide assembly. Locate the included Phillips screwdriver. Using the Phillips screwdriver, loosen the a screws on the left side of the thread guide assembly support so that the thread guide assembly can be raised. Remove screw 1, and then turn screw 2 three or four times to loosen it. 1 Remove the screw. 2 Turn the screw three or four times to loosen it. Raise thread guide into position and tighten b screw 2 on the left. Insert screw 1 into right side of the thread guide assembly support and tighten. 1 Insert screw and tighten. 2 Tighten screw. 26
![](/manual_guide/products/brother-international-pr670e-operation-manual-db31d3a/28.png)