Brother International PR670E Operation Manual - Page 75
When You Have a, Question, This May Help
View all Brother International PR670E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
EMBROIDERING TUTORIAL When You Have a Patterns: Question, This May Help Following patterns can be processed by the You machine to embroider. - Use USB media or SD cards to transfer the embroidery data with *.pen, *.pes, *.phc or *.dst Technical terms: format to the machine. Using the USB cable, the data can be transferred from the PC to the machine. 2 ■ DST This is the extension of Tajima data file (*.dst) that is one of the data formats of embroidery patterns. Tajima data does not contain color information, therefore the embroidery machine automatically - Optional embroidery cards - Embroidery patterns created by digitizing software program - The patterns saved on USB media or SD cards by the machine assigns colors when a Tajima (.dst) file is loaded. (Refer to page 200.) Embroidering: ■ Needle number The needles are numbered from right to left. The far right needle is number 1 needle. (Refer to page 7.) ■ Needle at the "embroidering position" This is the needle that is placed above the needle hole in the needle plate. The needle bar case is moved to position that particular needle with the next thread color to the "embroidering position". Also when using the needle threader, the needle that is going to be threaded should be moved to the "position of embroidery". (Refer to page 55 and page 56.) ■ Customize the embroidery colors - Use the thread color function by selecting either 64 colors or 300 colors, or by setting the custom thread color table on the pattern editing screen. For more details, see page 167 and page 169. - Use the manual color sequence function in the embroidering settings screen. For more details, see page 108. - Use the "Temporary needle bar setting" function by selecting the key on the "Embroidering" screen. More details please see the page 119. ■ Resume an unfinished pattern from the last time the machine was switched off. - The machine remembers the pattern and the position even after turning off the power. And the machine can resume the embroidery when the machine turns on again. (Refer to "Resume Embroidering After Turning Off the Machine" on page 101.) 1 Needle 2 Needle hole in the needle plate ■ Wiper This is the mechanism for pulling the thread. The wiper pulls the thread when the needle threader is used. The wiper also pulls the thread from the material when the machine trims the thread. This makes trimming threads after embroidering un-necessary. (Refer to page 55.) 73