Brother International PR670E Operation Manual - Page 62

Set the main power switch to "". d  The embroidery machine is turned off and the display and the start/stop button indicator go off. • Sewing can resume after the embroidery machine is turned on again. Back up several stitches to overlap the stitching. (Refer to "Resume Embroidering After Turning Off the Machine" on page 101 for details.) Memo • The machine can be stopped at any time, even while it is embroidering; however, if the machine is stopped when the thread color is changed, it is not necessary to go back through the stitching when embroidering is continued. The machine can be set to stop when the thread color is changed. (For details, refer to "Specifying pause locations before embroidering" on page 118.) ■ If the thread breaks while sewing If a problem occurs while sewing, such as if the thread breaks, the machine stops automatically. Re-thread the broken thread, back up several stitches, and then continue sewing. (Refer to "If the Thread Breaks or the Bobbin Thread Runs Out While Embroidering" on page 97 for details.) 12. Removing the Embroidery Frame and Fabric After sewing is finished, remove the embroidery frame, and then remove the fabric from the frame. Removing the embroidery frame CAUTION • When removing the embroidery frame, make sure that the start/stop button is lit in red. If the start/stop button is flashing in green, the machine may start sewing. If the machine accidentally starts operating, injuries may result. • When removing the embroidery frame, be careful that the embroidery frame does not hit any other part of the machine. • Do not lift up the embroidery frame holder with extreme force, otherwise it may be damaged. With both hands, grab the left and right a sides of the arms of the embroidery frame holder, and then slightly lift up the frame. The pins on the arms of the embroidery frame holder should come out of the holes in the sides of embroidery frame. 60