Brother International PR670E Operation Manual - Page 194

Lightly apply fabric glue or spray adhesive e to the back of the appliqué piece that was cut out, and then attach the appliqué piece to the base fabric at the position sewn using the "APPLIQUE POSITION" pattern in step d. Using a frame pattern to create appliqués (1) Appliqués can be created by sewing two frame patterns of the same size and shape-one sewn with straight stitches and the other sewn with satin stitches. • If an iron-on stabilizer is used to attach the appliqué piece to the base fabric, iron the pieces together without removing the base fabric from the embroidery frame. After attaching the appliqué piece, sew an f "APPLIQUE" pattern. The appliqué is finished. • Depending on the pattern, an "APPLIQUE" pattern may not be available. In this case, sew the appliqué using thread in the color of a part of the embroidery. Finish sewing the embroidery. g Select a frame pattern sewn with straight a stitches to embroider onto the fabric for the appliqué. Carefully cut outside of the stitching. Embroider the same pattern on the base b fabric. 192