Brother International PR670E Operation Manual - Page 226

Sewing cannot begin from the specified starting position. Change the starting position or rehoop the fabric and change the embroidering position. (Refer to 85, 113.) The needle has stopped at an incorrect position. Turn the handwheel so that the mark on the handwheel is at the top. The needle bar case could not be moved to its initial position. Touch to automatically reset the needle bar case. The needle bar case has stopped at an incorrect position. Touch to automatically reset the needle bar case. The needle bar case motor has locked up. Touch to automatically reset the needle bar case. The automatic needle-threading mechanism did not operate correctly. Remove the thread entangled in the automatic needle-threading mechanism, and then touch . Another operation was performed while the automatic needle-threading mechanism was threading the needle. Press the automatic needle threading button, and then perform the other operation after the needle is threaded. (Refer to page 54.) The pattern could not be saved because the memory is full. Delete some patterns. The memory capacity of the USB media has been exceeded. There is too much data in either the machine or the USB media. 224