Brother International PR670E Operation Manual - Page 209
Winding the bobbin
![]() |
View all Brother International PR670E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Winding the bobbin Prepare the bobbin and the spool of bobbin thread. Use cotton or spun polyester bobbin thread (from 74 dtex/2 to 100 dtex/2). APPENDIX Pass the thread through the hole in the left c of the thread guide toward the front of the winder. Align the groove in the bobbin with the a spring on the bobbin winder shaft, and set the bobbin on the shaft. 1 Hole in the thread guide Pass the thread around the tension disc as d shown in the illustration. Make sure that the thread is correctly fed into the tension disc. 1 Groove in the bobbin 2 Spring on the shaft 7 Set the thread spool on the spool pin. 1 Tension disc b 1 Thread spool 2 Spool pin Note • When using a small spool, remove the spool cushion and set the spool directly onto the spool pin. Also use the included spool cap to keep the small spool stable. 207
![](/manual_guide/products/brother-international-pr670e-operation-manual-db31d3a/209.png)