Brother International PR670E Operation Manual - Page 48

Note • Attach the embroidery frame to place the needle plate under the embroidering area otherwise the embroidery frame hits the needle plate. 1 Needle plate • If the outer frame is on top, as shown below, the embroidery frame is incorrectly attached. 8. Specifying Embroidering Setting From this screen, the entire pattern can be edited and embroidering settings can be specified. In addition, the embroidering position can be checked and a pattern can be saved for later use. Embroidering settings screen (For details on the keys and other information on the screen, refer to page 68.) 1 2 7 3 Insert the embroidery frame until it snaps d into place. 4 8 1 Make sure that the pins on the left and right arms of the embroidery frame holder fit into the positioning slot and hole on the embroidery frame. Continuing to the embroidering settings screen Press . a 5 9 6 0 1 Shows the size of the pattern in the pattern display area. 2 Displays a preview image. 3 Image on the Design Page shows image size, rotation, number of thread changes and measured position of image within the embroidery area. 4 Touch for additional editing functions. 5 Returns to the pattern editing screen. 6 Touch to store the pattern in memory. 7 The embroidering area guide in the pattern display area indicates the size of the embroidery frame that is actually installed. 8 Touch these keys to specify how the pattern will be embroidered. 9 Continues to the next screen 0 Touch to check the embroidering area. In this example, we will not specify any of the embroidering settings. Continue with the next operation. → The embroidering settings screen is displayed. 46