Brother International PR670E Operation Manual - Page 93

■ Unlocking the needle bar Display the embroidering screen, and then a touch the key for any needle bar other than the one that is locked.  The needle bar is unlocked and will return to original position. Adjusting the angle Depending on the type of fabric being embroidered, it may not be possible to stretch the fabric in the embroidery frame at the desired angle. In this case, adjust the angle of the pattern so that it is correctly positioned on the fabric. Touch . a OTHER BASIC PROCEDURES Example: Original angle Rotates 90 degrees to the right Rotates 10 degrees to the right Rotates 1 degree to the right Rotates 0.1 degree to the right Rotates 90 degrees to the left Rotates 10 degrees to the left 3 Rotates 1 degree to the left Rotates 0.1 degree to the left Moves the pattern in the direction of the arrow on the key. Moves the frame by 0.1 mm. Moves the frame by 0.5 mm. Moves at maximum speed when a key is held down. Touch this key to return the pattern to its original angle. Touch this key to close this screen. The following screen appears. 91