Brother International PR670E Operation Manual - Page 198

Hoop the appropriate part of the fabric. In e this case, hoop upper-left part of the fabric. When embroidering is finished, the h following screen appears. Touch . 1 Center of fabric Touch . f  A screen appears so that a section of the large-size embroidery pattern can be selected. Touch to select the next section of the i pattern, and then touch . Memo • The pattern can be rotated to either the left or right when is touched. Touch , and then press the start/stop g button to embroider the pattern section. Touch , and then . j Hoop the fabric for the next design section k aligning on the alignment stitching. In this case, align the left side of the hoop on the right side of the design section embroidered in step f. Note • The last step of the stitching of the pattern section will be an alignment stitching. Use this stitching for placement of adjacent pattern section. 196 1 Alignment stitching Note • Make sure that the alignment stitching is completely within the embroidery field. Set the embroidery sheet inside the embroidery frame and align the grid with the alignment stitching for easier placement.