Dell Broadcom NetXtreme Family of Adapters Broadcom NetXtreme II Network Adapt - Page 190
Diagnostic Test Descriptions, Table 3: Diagnostic Tests, Description, Number Name
View all Dell Broadcom NetXtreme Family of Adapters manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
User Diagnostics: Broadcom NetXtreme II Network Adapter User Guide uediag -fib Specifies the bin file for iSCSI boot. uediag -fibc Programs iSCSI configuration block 0. Used only with -fib . uediag -fibc2 Programs iSCSI configuration block 1. Used only with -fib . uediag -fibp Programs iSCSI configuration software. Used only with -fib . uediag -fipmi Specifies the bin file to update IPMI firmware. uediag -fmba Specifies the bin file to update the MBA. uediag -fnvm Programs the raw image into NVM. uediag -fump Specifies the bin file to update UMP firmware. uediag -help Displays the Broadcom NetXtreme II User Diagnostics (uediag) command options. uediag -I Specifies the number of iterations to run on the selected tests. uediag -idmatch Enables matching of VID, DID, SVID, and SSID from the image file with device IDs: Used only with -fnvm . uediag -log Logs the tests results to a specified log file. uediag -mba Enables/disables Multiple Boot Agent (MBA) protocol. 1 = Enable 0 = Disable uediag -mbap Sets the MBA boot protocol. 0 = PXE 1 = RPL 2 = BOOTP 3 = iSCSI_Boot uediag -mbav Enables/disables MBA VLAN. 1 = Enable 0 = Disable uediag -mbavval Sets MBA VLAN (