Dell Broadcom NetXtreme Family of Adapters Broadcom NetXtreme II Network Adapt - Page 49

NetWare Driver Software: Broadcom NetXtreme II Network Adapter User Guide LOAD BX2 SLOT=2 FRAME=Ethernet_II NAME=BX2_1_EII BIND IPX BX2_1_EII NET=C3C8F2E4 BIND IP BX2_1_EII ADDR=172.16.1.1 MASK=ff.ff.ff.0 mount all SEARCH ADD SYS:\JAVA\BIN SEARCH ADD SYS:\JAVA\NWGFX Removing Drivers from Autoexec.ncf To remove the drivers from the Autoexec.ncf file, locate the load and bind command lines associated with the Broadcom driver and remark them out by inserting the # symbol at the beginning of each command line, or by deleting the statement. Example: # LOAD BX2 SLOT=2 FRAME=Ethernet_802.2 NAME=BX2_1_E82 # BIND IPX BX2_1_E82 NET=FAFD3D25 # LOAD BX2 SLOT=2 FRAME=Ethernet_802.3 NAME=BX2_1_E83 # BIND IPX BX2_1_E83 NET=5A2D8D6D # LOAD BX2 SLOT=2 FRAME=Ethernet_SNAP NAME=BX2_1_ESP # BIND IPX BX2_1_ESP NET=477A35BD # LOAD BX2 SLOT=2 FRAME=Ethernet_II NAME=BX2_1_EII # BIND IPX BX2_1_EII NET=C3C8F2E4 # BIND IP BX2_1_EII ADDR=172.16.1.1 MASK=ff.ff.ff.0 NOTE: If you modify the Autoexec.ncf file, you must reboot the server before the changes take effect. Please read all Restrictions and Disclaimers. Back to Contents Page file:///T|/htdocs/NETWORK/BroadCom/71921/NetXtremeII/en/netware.htm[9/26/2012 3:28:49 PM]