Dell DX6000G Hardware Owner's Manual - Page 107
Installing a Cooling Fan, Connect the fan's power cable to the power connector on the system
View all Dell DX6000G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Installing a Cooling Fan CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Ensure that the fan is oriented correctly. Orient the fan module so that the side with the power cable faces towards the back of the system. 2 Slide the fan module into the fan assembly until the fan is fully seated. See Figure 3-15. 3 Connect the fan's power cable to the power connector on the system board. 4 Replace the system board shroud. See "Installing the System Board Shroud" on page 99. 5 Close the system. See "Closing the System" on page 81. 6 Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals. Installing System Components 107