Dell DX6000G Hardware Owner's Manual - Page 33
Check SEL to, LCD Log Full.
View all Dell DX6000G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Table 1-1. LCD Status Messages (continued) Code Text Causes Corrective Actions I1911 LCD Log Full. Check SEL to review all Errors. LCD overflow message. Check the SEL for details A maximum of ten error on the events. messages can display sequentially on the LCD. The eleventh message instructs the user to check Remove AC power to the system for 10 seconds or clear the SEL. the SEL for details on the events. I1912 SEL full. The SEL is full of events Review & clear and is unable to log any log. more. Check the SEL for details on the events, then clear the SEL. I1920 iDRAC6 Upgrade Optional iDRAC6 has Successful been upgraded successfully. Information only. W1228 RAID Controller battery capacity < 24hr. Warns predictively that the RAID battery has less than 24 hours of charge left. Allow RAID battery to charge to greater than 24 hours of sustained charge. If problem persists, replace RAID battery. W1627 Power required > PSU wattage. Check PSU and config. The system configuration requires more power than what the power supply can provide. Turn off power to the system, reduce the hardware configuration or install higher-wattage power supplies, and then restart the system. W1628 Performance The system configuration degraded. requires more power Check PSU and than what the power system supply can provide, but it configuration. can boot if throttled. Turn off power to the system, reduce the hardware configuration or install higher-wattage power supplies, and then restart the system. NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary at support.dell.com/manuals. About Your System 33