Dell DX6000G Hardware Owner's Manual - Page 43
See Using the System Setup, Program and UEFI Boot
View all Dell DX6000G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Table 1-2. System Messages (continued) Message No boot device available Causes Faulty or missing optical drive subsystem, hard drive, or hard drive subsystem, or no bootable USB key installed. No boot sector on hard drive Incorrect configuration settings in System Setup program, or no operating system on hard drive. No timer tick interrupt Faulty system board. PCIe Training Faulty or improperly Error: Expected installed PCIe card in the Link Width is x, specified slot. Actual Link Width is y. Corrective Actions Use a bootable USB key, optical drive, or hard drive. If the problem persists, see "Troubleshooting an Optical Drive" on page 151, "Troubleshooting a USB Device" on page 142, "Troubleshooting an Internal USB Key" on page 150, and "Troubleshooting a Hard Drive" on page 152. See "Using the System Setup Program and UEFI Boot Manager" on page 55 for information on setting the order of boot devices. Check the hard drive configuration settings in the System Setup program. See "Using the System Setup Program and UEFI Boot Manager" on page 55. If necessary, install the operating system on your hard drive. See your operating system documentation. See "Getting Help" on page 169. Reseat the PCIe card in the specified slot number. See "Troubleshooting Expansion Cards" on page 155. If the problem persists, see "Getting Help" on page 169. About Your System 43