Dell DX6000G Hardware Owner's Manual - Page 40
Invalid PCIe card, Gate A20 failure
View all Dell DX6000G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Table 1-2. System Messages (continued) Message Causes Corrective Actions DIMM configuration on each CPU should match. Invalid memory configuration on a dual-processor system. The memory module configuration for each processor must be identical. Ensure that the memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines" on page 111. Embedded NICx and The OS NIC interface is set NICy: in BIOS. The Management OS NIC=, in management tools. Management Shared NIC= Check the system management software or the System Setup program for NIC settings. If a problem is indicated, see "Troubleshooting a NIC" on page 143. Error 8602 Auxiliary Device Failure. Verify that mouse and keyboard are securely attached to correct connectors. Mouse or keyboard cable is loose or improperly connected. Reseat the mouse or keyboard cable. Defective mouse or keyboard. Ensure that the mouse or keyboard is operational. See "Troubleshooting a USB Device" on page 142. Gate A20 failure Faulty keyboard controller; See "Getting Help" on faulty system board. page 169. Invalid configuration information please run SETUP program. An invalid system configuration caused a system halt. Run the System Setup program and review the current settings. See "Using the System Setup Program and UEFI Boot Manager" on page 55. Invalid PCIe card The system halted because found in the an invalid PCIe expansion Internal_Storage card is installed in the slot! dedicated storage controller slot. Remove the PCIe expansion card and install the integrated storage controller in the dedicated slot. 40 About Your System