Dell PowerEdge 1955 Hardware Owner's Manual (PDF) - Page 123
Server Module Board Connectors
View all Dell PowerEdge 1955 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Table 6-1. Server-Module DIP Switch Settings DIP Switch PWRD_EN (Switch 1) Setting Description (default) The password feature is enabled when switch 1 is set to "on." The password feature is disabled when switch 1 is set to "off." NVRAM_CLR (Switch 2) (default) "on" "off" The configuration settings in NVRAM are retained at system boot when switch 2 is set to "off." The configuration settings in NVRAM are cleared at next system boot when switch 2 is set to "on." Server Module Board Connectors See Figure 6-3 and Table 6-1 for the location and description of the server module board connectors. DIP Switch Settings and Connectors 123
DIP Switch Settings and Connectors
123
Server Module Board Connectors
See Figure 6-3 and Table 6-1 for the location and description of the server module board connectors.
Table 6-1.
Server-Module DIP Switch Settings
DIP Switch
Setting
Description
PWRD_EN
(Switch 1)
(default)
The password feature is enabled when switch 1 is set to "on."
The password feature is disabled when switch 1 is set to "off."
NVRAM_CLR
(Switch 2)
(default)
The configuration settings in NVRAM are retained at system
boot when switch 2 is set to "off."
The configuration settings in NVRAM are cleared at next
system boot when switch 2 is set to "on."
"on"
"off"