Dell PowerEdge 1955 Hardware Owner's Manual (PDF) - Page 85
If the processor is removed from the socket with the heat sink, twist or slide the processor off
View all Dell PowerEdge 1955 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Figure 3-18. Installing and Removing the Heat Sink 1 2 1 screws (4) 2 heat sink NOTE: When removing the heat sink, the possibility exists that the processor might adhere to the heat sink and be removed from the socket. It is recommended that you remove the heat sink while the processor is still warm. 4 Remove the heat sink: a Slightly rotate the heat sink to loosen it from the processor. b If the processor is removed from the socket with the heat sink, twist or slide the processor off of the heat sink. Do not pry the processor off of the heat sink. c Set the heat sink on its top so as not to contaminate the thermal grease. 5 Pull the socket-release lever straight up until the processor is released from the socket. See Figure 3-19. Installing System Options 85