Dell PowerEdge 1955 Hardware Owner's Manual (PDF) - Page 33
Gb Ethernet Pass-through Module
View all Dell PowerEdge 1955 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Gb Ethernet Pass-through Module The Gb Ethernet pass-through module has 10 RJ45 ports. When installed in I/O 1 bay or I/O 2 bay, the Gb Ethernet pass-through module provides a connection between the server module and an external Gb Ethernet device. When installed in the I/O 3 bay or I/O 4 bay, the Gb Ethernet pass-through module provides a connection between the optional internal Gb Ethernet daughter card in the server module, providing a direct connection into an external Gb Ethernet device (see Figure 1-13). The Gb Ethernet pass-through modules are hot-pluggable. The Gb Ethernet pass-through module in I/O bay 3 connects to the optional Gb Ethernet daughter card installed in a server module. The Gb Ethernet pass-through module in I/O bay 4 connects to port 2 on the optional Gb Ethernet daughter card installed in a server module. Table 1-12 lists the functionality of the Gb Ethernet pass-through module indicators. For additional information on installing this module, see "Chassis I/O Module" on page 70. NOTE: Only connect the Gb Ethernet module to 1000-Mb external switch ports. Do not use this module with 10-Mb or 100-Mb external switch ports. Figure 1-13. Gb Pass-through Module Indicators and Features 1 2 3 5 4 9 7531 10 8 6 4 2 1 activity indicator 4 link indicator 2 link indicator 5 activity indicator 3 status indicator NOTE: Connectors on the Gb pass-through module correspond directly to the server module number. For example, server module 5 is connected to port 5 on the Gb pass-through module. About Your System 33