Dell PowerEdge 1955 Hardware Owner's Manual (PDF) - Page 68
Dell console switch see To tier an Avocent Analog KVM switch from a Dell 2161DS, 180AS
View all Dell PowerEdge 1955 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Tiering an Avocent Analog KVM Switch From a Dell Console Switch To tier an Avocent Analog KVM switch from a Dell 2161DS, 180AS, or 2160AS console switch, connect the ACI port on the rear of the Avocent Analog KVM switch to one of the 16 ARI ports on the back of the Dell console switch (see Figure 3-8). NOTE: Do not connect the KVM switch ACI port to a LAN device such as a network hub. Doing so may result in equipment damage. Figure 3-8. Tiering an Avocent Analog KVM Switch from a Dell Console Switch 2 1 5 3 4 1 Dell console switch 4 ACI port 2 ARI port 5 system 3 analog KVM switch Once the KVM switch is connected, the server modules appear in OSCAR. The Dell console switch will automatically configure the slots in the KVM menu. NOTE: Once the local system is set up, you must also resynchronize the server list from the Remote Console Switch software in order to see the list of server modules. See "Resynchronizing the Server List at the Remote Client Workstation." 68 Installing System Options