Dell PowerEdge 1955 Hardware Owner's Manual (PDF) - Page 60
Removing a Fan, Remove the failed fan
View all Dell PowerEdge 1955 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Removing a Fan NOTICE: After a fan module is removed from the system, replace it immediately to ensure proper cooling. 1 Identify the failed system fan using the back-panel fan module indicators. See Figure 1-7. Fan 1 is the fan closest to the chassis midplane; Fan 2 is the fan closest to the fan-module handle. 2 Remove the fan module: a Press down on the fan-module release tab. See Figure 3-2. b Rotate the fan-module handle down to eject the fan module. c Slide the fan module out of the chassis. Figure 3-2. Removing and Installing a Fan Module 1 2 3 1 handle 2 release tab 3 Remove the failed fan: a Pull up the fan-release tab. See Figure 3-3. b Lift up the fan lever. c Pull out the fan from the fan module. 3 fan module 60 Installing System Options