Epson C3500 Technical Reference Guide - Page 105

Chapter 3 Handling • DataMatrix(Rectangle) Cell Size: Number of Vertical Cells: Number of Horizontal Cells: Makes settings of the cell (module) size for DataMatrix. Specify the number of cells for DataMatrix in the vertical direction. Specify the number of cells for DataMatrix in the horizontal direction. [Minimize]: Optimize the minimum number of cells automatically. [Specify the Size]: Change settings to the selected size. ❏ The following table shows the recommended value for the 2D symbol module. • Recommended value for setting the barcode/2D symbol font (2D symbol of stack type) (PDF417, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Expanded Stacked) Category Graphic resolutions (Horizontal x vertical) (dpi) Print Status (*1) Adjust Bar Width (*2) Minimum Module [by 360 dpi] ANSI Grade D or higher ANSI Grade C or higher ANSI Grade B or higher Plain, Plain label 360 x 360 No Paper feed With Paper feed 6 dot - - 6 dot - - 3 No Paper 4 dot - - feed Synthetic 360 x 360 3 label Matte With Paper feed 4 dot - (*2) - Matte label Glossy label Wristband 720 x 360 No Paper feed With Paper feed 4 dot - - 4 dot - (*2) - - : Not supported. *1 : Whether paper feed is performed during printing 2D symbol can be checked in [Display Media Feed Position] - [Display Print Preview] in the Print Preview function. For this function, see "Print Preview" on page 111. *2: Specify when using PDF417. 105