Epson C3500 Technical Reference Guide - Page 207
Plain / Matte, 124 to 0.128 mm {0.0047 to 0.005}
View all Epson C3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
Chapter 6 Appendix Media type Media source Paper width Black mark width Black mark length Center of a black mark Gaps between black marks Paper thickness Gaps of perforated line Form of perforated line Number of folds Plain / Matte Fanfold paper 50 to 108 mm {1.97 to 4.25"} 13 mm {0.51"} or more 4 mm {0.16"} or more (with a width of at least 4 mm around) 8.5 mm 1 mm {0.33 0.039"} 8 to 304.8 mm {0.32 to 12.0"} 0.124 to 0.128 mm {0.0047 to 0.005"} 203.2 to 304.8 mm {8 to 12"} Plain media : 1 mm {0.039"} uncut, 5 mm {0.2"} cut Fine media : 1 mm {0.039"} uncut, 5 mm {0.2"} cut PET film : 0.6 mm uncut, 8.4 mm cut 500 or less Do not use the paper with a hole or cutout. Autocutting on the perforated lines may generate minute paper dust, causing machine problems. Also, autocutting ahead of the perforated line may cause problems when feeding paper. Therefore, autocutting must be performed 0.5 mm to 1 mm {0.02 to 0.039"} behind the perforated line. Black marks must position away at least 0.5 mm {0.02"} from the perforated line. The perforated lines on both sides of the paper edge must be left uncut. Make sure to keep the same position of the black marks to the perforated lines (position that can be detected by black mark sensor) when inserting the paper from either side in order to use the paper inserting from reverse direction. 5 207