Epson C3500 Technical Reference Guide - Page 16
Power Switch, Paper FEED button, CAUTION
View all Epson C3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Power Switch CAUTION Before turning on the printer, be sure to check that the AC adapter is connected to the power supply. ❏ When DIP switch 1 is OFF: • Turns the power on after the POWER button has been pressed while the power is OFF. • Turns the power off after the POWER button has been pressed for approximately 0.5 seconds while the power is ON. ❏ When DIP switch 1 is ON: • Resets the printer after POWER button has been pressed for approximately 0.5 seconds. See "Setting the DIP Switches" on page 48 for DIP switch setting. Paper FEED button ❏ If "Media detection settings" is set to "Full-page label/Continuous paper/Transparent fullpage label", feeds the paper continuously. • The paper is fed by 15 mm if FEED button is pressed once. • If the FEED button is held down, the paper is continuously fed until the button is released. (6 seconds at a maximum) ❏ If "Media detection settings" is set to "Die-cut label (Blackmark)", "Continuous paper (Blackmark)", or "Die-cut label (Gap)/Transparent die-cut label", feeds the paper to the print starting position. When the printer is in the power saving mode when its vacuum fan is stopped, starting up and stabilizing the rotation of the vacuum fan requires some time. Approximately 2 seconds is required from the point when the paper FEED button is pressed until the point when paper feed starts. 16