Epson C3500 Technical Reference Guide - Page 211
Label edge R, Paper thickness
View all Epson C3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
Chapter 6 Appendix Media type Plain label / Matte label / Glossy label Media source Roll paper Backing paper width 30 to 112 mm {1.18 to 4.41"} Label width 25.4 to 108 mm {1 to 4.25"} Label length 8 to 1,117.6 mm {0.32 to 44"} Gap between labels 3 to 6 mm {0.12 to 0.24"} Left and right outer edges 2 mm 0.5 mm {0.079 0.02"} Edge cutoff width 1.5 mm or more Label edge R 1.5 mm {0.059"} or less Width of a black mark 13 mm {0.51"} or more Length of a black mark 4 mm {0.16"} or more (with a width of at least 4 mm around) Center of a black mark 8.5 mm 1 mm {0.33 0.039"} Gaps between black marks 11 to 1,123.6 mm {0.43 to 44.24"} Paper thickness Plain label / Matte label: 0.129 to 0.143 mm {0.005 to 0.006"} Glossy label: 0.184 mm {0.007"} Paper core Plain label: outer diameter 44.1 mm {1.74"} or more Matte label / Glossy label: outer diameter 56.8 mm {2.24"} or more External diameter Maximum 101.6 mm {4"} Winding direction Printing face must be facing outside. 5 Form of perforated line Plain media : 1 mm {0.039"} uncut, 5 mm {0.2"} cut Fine media : 1 mm {0.039"} uncut, 5 mm {0.2"} cut PET film : 0.6 mm uncut, 8.4 mm cut Do not use the paper with a hole or cutout. For the black mark position of the die-cut label paper, match the label edge to the black mark edge. You can use paper with all fringes removed or paper with fringes on the left and right removed. 211