Epson C3500 Technical Reference Guide - Page 160
Setting Check Modes, Self-test Mode
View all Epson C3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Setting Check Modes Besides the ordinary print mode, the printer has the self-test mode and allows you to print the status sheet to check the various settings of the printer. Self-test Mode Printing errors such as dot missing can be checked on self-test mode. In addition, the firmware version, Post-Printing Verification Settings, and Media detection settings can be checked. Follow the steps below to run the self-test. 1 Set the die-cut label, receipt or continuous label which length is 90 mm or more. 2 Turn the power on while pressing the paper feed button. (Keep pressing the Power switch until the POWER LED is on.) Following test pattern is printed. Firmware Version Number of Cut "Nozzle check mode" "Media detection settings" Printing position adjustment value (Cut position) Printing position adjustment value (Cut position and printing position) 160