Epson C3500 Technical Reference Guide - Page 48
Setting the DIP Switches, Setting Procedure
View all Epson C3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Setting the DIP Switches Change the DIP switch settings in the following cases. • When attaching the power switch cover to prevent the power switch from being pressed • When changing the LCD display language • When changing the volume of the buzzer Setting Procedure Follow the steps below to change the DIP switch settings. CAUTION Turn the power off before removing the DIP switch cover. Otherwise, a short-circuit may cause the printer to malfunction. DIP switch setting becomes enabled after turning the power on or completing reset by the interface. 1 Make sure the power supply for the printer is turned OFF. 2 Open the ink cartridge cover and remove the DIP switch cover. 3 Set the DIP switches, using the tip of a tool, such as a small screwdriver. 4 Attach the DIP switch cover, and close the ink cartridge cover. 48