Epson C3500 Technical Reference Guide - Page 92
Upper Line: Minimum Mod
View all Epson C3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
• Module: Category Plain, Plain label Synthetic label Matte Matte label Glossy label Wristband Sets the thin element width in dots. Graphic resolutions (Horizontal x vertical) (dpi) Print direction *1 Adjust Bar Width *2 Upper Line: Minimum Module [by 360 dpi] Lower Line: Minimum Element Ratio ANSI Grade D or higher ANSI Grade C or higher ANSI Grade B or higher 360 x 360 Fence Ladder 4 dot - - 2.5 6 dot - - 2.5 360 x 360 Fence Ladder Required 3 dot 2.5 6 dot 2.5 (*3) 4 dot 2.5 - (*3) - 720 x 360 Fence Ladder 3 dot 2.5 6 dot 2.5 (*3) 4 dot 2.5 - (*3) - - : Not supported *1: In some cases, dot missing and irregularity in ink shots may occur when printing ladder barcodes (when the barcodes from the start to stop are printed in a vertical direction), lowering the ANSI grade to F and making barcodes unrecognizable. Therefore, fence barcodes (when the barcodes from the start to stop are printed in a horizontal direction) are recommended to use. To use ladder barcodes, make consideration such as printing HRI characters. *2: Ink may penetrate the paper due to its characteristics, and bars of printed barcodes tend to become thicker. This tendency is more prominent with some papers. To maintain the barcode recognition rate, use methods such as reducing the data in a bar by 1 pixel and increasing the blank space by 1 pixel (Bar width adjustment). However, do not apply this method to 2-dimensional symbols. 92