Epson C3500 Technical Reference Guide - Page 120

Paper Loading Settings Follow the steps below to specify the settings for paper loading at power-on/paper cover close. The following types are available for the settings for paper loading at power-on/paper cover close. (The type is set to [Paper feed for positioning (With cutting)] by default. If you use the default setting, there is no need to change the settings.) Paper loading at power-on Settings Description Paper feed for positioning (With cutting) Paper loading settings: Die-cut label (Blackmark), Continuous paper (Blackmark), Die-cut label (Gap)/Transparent die-cut label Paper is loaded based on the upper end of black mark/label detected by the black mark detector or label detector. After paper feed is finished, autocut is performed and the printer enters the standby status. Paper loading settings: Full-page label/Continuous paper/Transparent fullpage label A certain amount of paper is fed. After paper feed is finished, autocut is performed and the printer enters the standby status. Paper feed for positioning (Without cutting) Paper loading settings: Die-cut label (Blackmark), Continuous paper (Blackmark), Die-cut label (Gap)/Transparent die-cut label Paper is loaded based on the upper end of black mark/label detected by the black mark detector or label detector. After paper feed is finished, no autocut is performed and the printer enters the standby status. Paper loading settings: Full-page label/Continuous paper/Transparent fullpage label A certain amount of paper is fed. After paper feed is finished, no autocut is performed and the printer enters the standby status. No paper feed for positioning No paper loading or paper feeding is performed. 120