Epson C3500 Technical Reference Guide - Page 162

Status Sheet Printing (LAN interface model only) Network setting can be checked by printing the status sheet for the LAN interface model. Following status sheet is printed when pressing the status sheet button on the rear of the printer. The network setting can be reset to the default value by turning on the printer while pressing the status sheet button and holding the button down for 20 seconds or more. EPSON Network Status Sheet 1. MAC Address 2. HW/SW Version 3. Network Status XX : XX : XX : XX : XX : XX XX . XX/XX . XX Auto (100Base Full) Auto (10 Base Full/10 Base Half/100 Base Full/ 100 Base Half)/10 Base Full/10 Base Half/100 Base Full/100 Base Half 4. Port Type Auto Auto/MDI/MDI-X 5. Get IP Address Manual Auto/Manual 6. IP Address XXX . XXX . XXX . XXX 7. Subnet Mask XXX . XXX . XXX . XXX 8. Default Gateway XXX . XXX . XXX . XXX 9. APIPA Disable Enable/Disable 10. Set using PING Disable Enable/Disable 11. DNS Address Disable Enable/Disable XXX . XXX . XXX . XXX XXX . XXX . XXX . XXX XXX . XXX . XXX . XXX 12. UPnP Disable Enable/Disable 13. Bonjour Disable Enable/Disable 14. Port Control LPR Enable Enable/Disable Port 9100 Enable Enable/Disable 15. Printing Control Disable Enable/Disable 16. Time Server Disable Enable/Disable 17. Idle Timeout LPR XXXX sec Port 9100 XXXX sec 162