Epson C3500 Technical Reference Guide - Page 138
Network Interface, Factory settings, How to initialize the settings to the factory settings
View all Epson C3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Network Interface The LAN interface information for this printer is as shown below. The network setting can be checked by printing the status sheet. See "Status Sheet Printing (LAN interface model only)" on page 162. Factory settings The factory settings for this printer are as follows: Item IP address setting mode*1 IP address Host computer name Domain name Factory settings Manual / Auto 192.168.192.168*2 EPSONxxxxxx (xxxxxx sets the lowest 6 digits of the MAC address.) None *1:The factory settings differ depending on the model. *2:Default value with "IP address setting mode" set to "Manual". The printer driver has no function to automatically follow the IP address set for the printer. If the printer is used with "IP address setting mode" set to "Auto", printing may be disabled. We recommend consulting with the network administrator in advance or setting the fixed IP address using any of various types of utilities (InstallNavi, EpsonNet Config, EPSON Deployment Tool, etc.). See "Utilities and Manuals" on page 178. How to initialize the settings to the factory settings Follow the steps below to initialize the LAN interface of this printer. 1 Make sure that the printer is turned off. 2 Turn the power on while pressing the STATUS SHEET button; then continue to press the status sheet button for ten seconds or more. The settings for the LAN interface can be changed to the factory settings. 138