Epson NX User Manual - Page 58
Removing an Option Card, Removing/Installing the Option Card
View all Epson NX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Removing and Replacing Subassemblies Removing an Option Card Follow these steps to remove an option card that has been installed in the computer in order to access components on the main system board, to change a jumper setting, or to change option cards: 1 Remove the computer's cover as described on page 3-2. 2 Remove the retaining screw securing the option card to the computer as shown in Figure 3-4. Then pull the card straight out from the riser board. Figure 3-4 Removing/Installing the Option Card 3 Set the option card aside with the component side facing up. Note After removing an option card, check to see if any jumper settings on the main system board need to be changed. For example, if you remove a mouse interface card, the setting of jumper J12 needs to be changed. If you remove a video card, the settings of jumper Jl0 or J11 may need to change. See page 1 - 12 for more information on jumper settings. Epson NX Service Manual 3-5