Epson NX User Manual - Page 72
Removing the Speaker, Speaker and LED Assemblies
View all Epson NX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Removing and Replacing Subassemblies Removing the Speaker Follow these steps to remove the speaker: Remove the cover (see page 3-2) and any option cards that may be in the way (see page 3-5). Disconnect the speaker cable from CN3 on the system board From the front of the chassis lift up on the lower speaker unit tab to release it from the lower chassis mounting hole (see Figure 3-15). From the backside of the front chassis, pull the bottom of the speaker unit up and away from the front of the chassis. From the backside of the speaker unit the speaker can be removed by pushing it out of its holder. Speaker assembly LED assembly Figure 3-15 Speaker and LED Assemblies Replacing the Speaker Follow these steps to replace the speaker: 1 From the backside of the front chassis, insert the upper tab of the speaker unit into the upper mounting hole and lower the bottom tab of the speaker unit down and into the lower mounting hole in the front of the chassis (see Figure 3-15). 2 Connect the speaker cable to CN3 on the system board. 3 Replace any option cards removed and the cover. Epson NX Service Manual 3-19