Epson PowerLite Pro G5350 Operation Guide - EasyMP - Page 85
Check, Remedy, For Wireless LAN, Quick Connection Mode
View all Epson PowerLite Pro G5350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Troubleshooting 85 f The projector is not found when EMP NS Connection is started Check Remedy Is the wireless LAN unit connected? For Wireless LAN Check that the optional wireless LAN unit is securely connected. Is the projector's configuration menu open? Are the computer's LAN card and the built-in LAN function available? Is the projectors's SSID the same as the access point's SSID? Quick Connection Mode While the configuration menu is displayed, network connection becomes invalid. Close the configuration menu and return to the EasyMP standby screen. Check that LAN is valid by checking "Control Panel" -"System" in the device manager and so on. Select a different SSID for the projector. See your User's Guide for more information. Is the DHCP function for wired LAN turned ON? Quick Connection Mode Turn OFF the "DHCP" setting for "Wired LAN" from the configuration menu. See your User's Guide for more information. Was the network adapter used selected correctly with If the computer has multiple LAN environments, it cannot connect unless the network adapter is selected EMP NS Connection? correctly. When using a computer running Windows, start EMP NS Connection, and select the network adapter you are using from "Set Options" -"Switch LAN". s p.40 For wireless LAN connection, is the wireless LAN setting enabled when the computer is in power save mode? Enable the wireless LAN. Are there any obstacles between the access point and Sometimes interference prevents the projector from being found in a search. Check for any obstacles between the computer or projector? the access point and the computer or projector, and change their position to lessen potential interference. For Wireless LAN Is the computer's wireless LAN electromagnetic wave Set the electromagnetic wave strength to maximum. strength set to low? Does the wireless LAN conform to 802.11g, 802.11b, The optional wireless LAN unit is only compatible with standards 802.11g, 802.11b, and 802.11a, and not or 802.11a? with other standards such as 802.11. Is the firewall turned off, or has the firewall been registered as an exception? For Wireless LAN When you do not wish to turn off the firewall or register the firewall as an exception, make the necessary settings to open the ports. The ports used by EMP NS Connection are "3620", "3621", and "3629".