Epson PowerLite Pro G5350 Operation Guide - EasyMP - Page 86
Check, Remedy, For Wired LAN, For Windows
View all Epson PowerLite Pro G5350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Troubleshooting 86 Check Is the network cable connected correctly? For Wired LAN Remedy Check that the network cable is connected correctly. Reconnect it if necessary. f Cannot connect in "Advanced Connection Mode" or wired LAN connection Check Remedy Are the SSID settings for the computer, access point, Set the computer, the access point, and the projector to the same SSID. See your User's Guide for more and projector different? information. Are the WEP keys set properly? When selecting WEP from "Security", set the access point, the computer, and the projector to the same WEP key. See your User's Guide for more information. Are the connection denial functions, such as MAC Set the projector to allow connections from the access point. address restrictions and port restrictions, set correctly at the access point? Are the IP address, the subnet mask, and the gateway When not using a DHCP, adjust each setting. See your User's Guide for more information address for the access point and the projector set correctly? Are the access point and the projector's subnet different? Select "Manual search" from EMP NS Connection, specify the IP address, and connect. s p.33 f The Slide show cannot be displayed on the desired display when using the multi-screen display. Check Remedy Are you using PowerPoint 2002 or an earlier version? For Windows To set and use two or more virtual displays, use PowerPoint 2003, or limit the number of virtual displays to one before displaying the Slide show. f Applications are no longer displayed from the computer's screen when using the multi-screen display. Check Remedy Is another application running on the virtual display? When EPSON Virtual Display is installed, another application sometimes runs on the virtual display. If this For Windows happens, set "EPSON Virtual Display" to "Off" in "Screen properties".