Home » Fujitsu Manuals » Scanners » Fujitsu 5900C » Manual Viewer

Fujitsu 5900C Operator's Guide - Page 128

Install the Brake roller again after cleaning., Close the Pad cover.

UPC - 097564306945

Add to My Manuals
Save this manual to your list of manuals

Page 128 highlights

7. Remove the Brake roller. Move the roller slightly to the right, then pull it upwards to remove it, as shown below. Brake roller 8. Clean the rubber surface of the Brake roller using a lint-free cloth, moistened with the cleaner F1 or isopropyl alcohol. Brake roller 9. Install the Brake roller again after cleaning. Brake roller 10. Close the Pad cover. 108 4.4 Cleaning the Rollers (with a lint-free cloth)

Section	Page
CONTENTS	17
1 NAMES AND FUNCTIONS OF PARTS	21
1.1 Names and Functions of Parts	22
1.2 Operator panel	25
2 BASIC SCANNER OPERATIONS	27
2.1 Turning the Scanner ON /OFF	28
2.2 Opening and Closing the Hopper	30
2.3 Opening and Closing ADF	32
2.4 Opening and Closing Top Cover	34
2.5 Setting the Hopper Height	35
2.6 Loading Documents on the Hopper	37
2.7 Setting up the Stacker	42
2.8 Using the Document smoother	47
2.9 Setting the Paper Thickness	49
2.10 Scanning Documents	50
2.11 Starting Scanning with Button	53
2.12 Feeding Documents Manually	54
2.13 How to use the Scanner Driver	61
2.14 Before Using [Scan] / [Send to] button	84
2.15 Resuming from Power Saving Mode	88
3 SCANNING VARIOUS TYPES OF DOCUMENTS	89
3.1 Double Sided Scanning	90
3.2 Scanning Documents Longer than A3	91
3.3 Scanning Documents with different widths	93
3.4 Saving Scanned Images in PDF Format	96
3.5 Excluding a Color from the image (drop out color)	102
3.6 Skipping blank Pages	105
3.7 Detecting Multifeeds	108
3.8 Correcting skewed Documents	110
3.9 Multi Image Output	112
3.10 Color/monochrome Auto Detection	115
4 DAILY CARE	119
4.1 Cleaning Materials and Areas Requiring Cleaning	120
4.2 Cleaning the Pad	122
4.3 Cleaning the Rollers (using the cleaning sheet)	123
4.4 Cleaning the Rollers (with a lint-free cloth)	126
4.5 Cleaning the Transport path and the sensors	130
5 REPLACEMENT OF CONSUMABLES	135
5.1 Consumables and Replacement Cycle	136
5.2 How to check and reset the Consumables Counter	137
5.3 Replacing the Pad	141
5.4 Replacing the Pick Roller	142
5.5 Replacing the Separator Rollers	144
5.6 Replacing the Brake roller	147
6 SOLVING COMMON PROBLEMS	149
6.1 Clearing Document Jams	150
6.2 Error messages of the Operator panel	152
6.3 Troubleshooting	155
6.4 Before Contacting a Service Provider	168
6.5 Labels on the Scanner	170
7 DOCUMENT SPECIFICATIONS	171
7.1 Document Size	172
7.2 Document Quality	173
7.3 Maximum Document Loading Capacity	176
7.4 Hole-punching Prohibited Areas	177
7.5 Multifeed Detection Conditions	178
7.6 Background Color Areas	180
7.7 Job Separation Sheet	181
7.8 Scanning Mixed Documents	182
8 SCANNER SETTINGS	185
8.1 Scanner Settings	186
8.2 Power saving setting	192
8.3 Offset/Scan scale	193
8.4 Multifeed Detection	195
8.5 Page Edge Filler (ADF)	199
8.6 Dropout Color	201
8.7 Pre-Pick	202
8.8 Page Edge Filler (Automatic paper size detection)	203
8.9 Thin Paper Mode	205
8.10 Paper Jam Detection	206
8.11 AutoCrop Boundary	207
8.12 SCSI Bus Width	208
8.13 Auto Color Detection	209
8.14 Alarm Setting	210
8.15 Jam Detection Outside of Scannable Area When Transporting...	211
8.16 Imprinter Selection	212
8.17 Timeout for Manual Feeding	213
9 OPTIONS	215
9.1 Options	216
9.2 fi-590PRF (Pre-imprinter)	217
9.3 fi-590PRB (Post-imprinter)	218
9.4 Other Options	219
10 SCANNER SPECIFICATIONS	221
10.1 Basic Product Specifications	222
10.2 Installation Specifications	224