Fujitsu 5900C Operator's Guide - Page 193
Offset/Scan scale
UPC - 097564306945
View all Fujitsu 5900C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
8.3 Offset/Scan scale When the position of the scanned image is not correct or the image is elongated, use the following procedure to adjust the Offset and the Scan scale for correction. ATTENTION The factory default setting are appropriate, so normally there is no need to make any adjustment. 8 1. Start up the Software Operation Panel. Refer to "8.1 Scanner Settings" on page 166. 2. Click the [Offset] button on the [Device setting] tab. SCANNER SETTINGS 8.3 Offset/Scan scale 173
173
8.3 Offset/Scan scale
8
SCANNER SETTINGS
8.3
Offset/Scan scale
When the position of the scanned image is not correct or the image is elongated, use the following proce-
dure to adjust the Offset and the Scan scale for correction.
1.
Start up the Software Operation Panel.
Refer to
“8.1 Scanner Settings” on page 166
.
2.
Click the [Offset] button on the [Device setting] tab.
ATTENTION
The factory default setting are appropriate, so normally there is no need to
make any adjustment.