Fujitsu 5900C Operator's Guide - Page 93
Scanning Documents with different widths
UPC - 097564306945
View all Fujitsu 5900C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
3.3 Scanning Documents with different widths When you scan a batch of documents with different widths, follow the instruction below. 1. Align the leading edge of the documents. Aligning the document alongside their center line Aligning the document with its left (or right) edge 3 SCANNING VARIOUS TYPES OF DOC- This section describes the procedure to align the document alongside their center line. For the procedure to align the document with its left (or right) edge, refer to " (2)Setting the document by either Side Guide of the hopper." on page 19. 2. Load the documents on the center of the hopper. Pick roller 3.3 Scanning Documents with different widths 73
73
3.3 Scanning Documents with different widths
3
SCANNING VARIOUS TYPES OF DOC-
3.3
Scanning Documents with different
widths
When you scan a batch of documents with different widths, follow the instruction below.
1.
Align the leading edge of the documents.
This section describes the procedure to align the document alongside their center line.
For the procedure to align the document with its left (or right) edge, refer to
“ (2)Setting the
document by either Side Guide of the hopper.” on page 19.
2.
Load the documents on the center of the hopper.
Aligning the document
alongside their center line
Aligning the document
with its left (or right) edge
Pick roller