Fujitsu 5900C Operator's Guide - Page 208
SCSI Bus Width
UPC - 097564306945
View all Fujitsu 5900C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
8.12 SCSI Bus Width When using the SCSI-connected scanner, you can select a data transfer width. Configure the settings for the SCSI Bus Width as follows: 1. Start up the Software Operation Panel. Refer to "8.1 Scanner Settings" on page 166. 2. Select the "SCSI Bus Width" setting on the [Device Setting 2] tab. 3. Select either 16-bit or 8-bit. ATTENTION To use SCSI cards and/or SCSI cables that do not support Ultra Wide SCSI, select "8-bit". 188 8.12 SCSI Bus Width
188
8.12 SCSI Bus Width
8.12 SCSI Bus Width
When using the SCSI-connected scanner, you can select a data transfer width.
Configure the settings for the SCSI Bus Width as follows:
1.
Start up the Software Operation Panel.
Refer to
“8.1 Scanner Settings” on page 166
.
2.
Select the “SCSI Bus Width” setting on the [Device Setting 2] tab.
3.
Select either 16-bit or 8-bit.
ATTENTION
To use SCSI cards and/or SCSI cables that do not support Ultra Wide SCSI,
select “8-bit”.