Fujitsu 5900C Operator's Guide - Page 153

■ Temporary Errors [U] and a number will be displayed alternately. Display Meaning Solution U1 A paper jam occurred. 1. Remove the jammed document. Refer to "6.1 Clearing Document Jams" on page 130 2. Confirm if the document conditions are appropriate for scanning with the ADF. (Refer to "7.2 6 Document Quality" on page 153) U2 A Multifeed occurred. When pushing the [Send to] on the Operator panel, the multi fed papers will be ejected. SOLVING COMMON PROBLEMS U4 The ADF or the Pre-Imprinter cover is opened. Close the ADF cover or Pre-Imprinter cover cor- rectly. U6 The print cartridge of the imprinter (sold sepa- This error occurs only when the imprinter option rately) is not set. (sold separately) is used. Refer to the "fi-590PRF/fi-590PRB Imprinter Operator Guide" for further details. U8 One of the following error occurred: 1. Clean the document sensors. 1. Document sensors are dirty. For details, refer to "4.5 Cleaning the Trans- 2. The stacker is full. port path and the sensors" on page 110. 3. The Brake roller or Separator rollers are not 2. Verify that the number of sheets ejected to the installed properly. stacker is below stacker's capacity, and that the Pick roller is not set for manual feeding. 3. Verify that the both rollers are installed properly. For details, refer to "5.5 Replacing the Separator Rollers" on page 124 and "5.6 Replacing the Brake roller" on page 127. * When pushing the [Scan] or [Send to] button, the error indication on the function number display will disappear and the scanner goes into the ready status. 6.2 Error messages of the Operator panel 133