Fujitsu 5900C Operator's Guide - Page 147
Replacing the Brake roller
UPC - 097564306945
View all Fujitsu 5900C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
REPLACEMENT OF CONSUMABLES 5.6 Replacing the Brake roller 1. Move the Hopper down to the "low" position if it is set in an upper level. For details, refer to "2.5 Setting the Hopper Height" on page 15. 2. Open the ADF cover. Refer to "2.3 Opening and Closing ADF" on page 12. 5 Pad cover 3. Open the Pad cover on the lower transport path. Grab both sides of the cover, press to the inside and pull down (towards you), as shown in the illustration below. Pad Cover 5.6 Replacing the Brake roller 127
127
5.6 Replacing the Brake roller
5
REPLACEMENT OF CONSUMABLES
5.6
Replacing the Brake roller
1.
Move the Hopper down to the "low" position if it is set in an upper level.
For details, refer to
“2.5 Setting the Hopper Height” on page 15
.
2.
Open the ADF cover.
Refer to
“2.3 Opening and Closing ADF” on page 12.
3.
Open the Pad cover on the lower transport path.
Grab both sides of the cover, press to the inside and pull down (towards you), as shown in the
illustration below.
Pad cover
Pad Cover